图片名称

What is the working principle of the plunger pump?

The working principle of the plunger pump: The plunger pump reciprocates in the cylinder through the plunger rod, thereby generating a pressure difference to input the fluid. Its advantages are mainly that it has a wide range of applications and can output high-pressure media; its disadvantages are mainly that the structure is more complicated, the amount of maintenance is large, the vibration is large during operation, the noise is large, and there are many wearing parts. There are single-cylinder and multi-cylinder piston pumps, and the structures are about different.

The structure of the plunger pump:

Piston pumps are divided into two representative structural forms: axial piston pumps and radial piston pumps; since radial piston pumps are a new type of high-efficiency pump with relatively high technical content, with the With the continuous acceleration of localization, radial piston pumps will inevitably become an important part of the application field of piston pumps; radial piston pumps are piston pumps in which the reciprocating direction of the piston or plunger is perpendicular to the drive shaft.

The working principle of the radial plunger pump: the driving torque is transmitted from the drive shaft through the cross coupling to the star-shaped hydraulic cylinder rotor, and the stator is not subject to other lateral forces. The rotor is mounted on the distribution shaft. The radially arranged plungers located in the rotor bear against the eccentrically stroked stator via hydrostatically balanced sliding shoes.

related news


Plunger carrier ring

The plunger oil carrying ring is mainly composed of a plunger, a spring, a sealing ring and a housing. A plunger is a cylindrical metal rod that connects to other mechanical parts in order to transfer liquid from one container to another. The spring is a helical coil of metal that keeps the seal in place and seals. A seal is a soft, ring-shaped part that fits over the plunger and prevents fluid from leaking. The housing is a metal shell that houses the plunger and seal.


What is the role and importance of the cylinder liner?

Cylinder liner refers to a metal sleeve installed in the cylinder of the automobile engine. Its function is to protect the cylinder of the automobile engine and provide a sealing gap between the cylinder and the piston. The cylinder liners are of great importance because they prevent the pistons from coming into direct contact with the cylinder block, thereby avoiding mutual wear and damage. When the engine is running, the high-pressure and high-temperature combustion gas will cause huge pressure and wear on the cylinder liner, so the cylinder liner needs to have high temperature resistance, wear resistance, corrosion resistance and other characteristics. If the cylinder liner is damaged or severely worn, the pressure in the cylinder will be unstable, and even serious consequences such as air leakage and cylinder explosion will occur. Therefore, maintaining the health of the cylinder liner is very important for the normal operation of the car engine.


What are the plunger pump accessories?

Generally speaking, there are relatively many types of accessories for the plunger pump, but different accessories play a key role in ensuring the safe and stable operation of the plunger pump. In order to ensure the quality and safety performance of the plunger pump, it is recommended that users must choose high-quality materials and reliable manufacturers when selecting accessories.


What are the mud pump accessories?

The casing of the mud pump is the main part of the pump, in which components such as impellers, bearings and bearing housings are installed. The shell is usually made of cast iron or steel plate, which has good wear resistance and strength. Bearings and bearing housings are important parts to support the pump rotor, they can reduce the friction and wear of the rotor, thus prolonging the service life of the pump.


What should be paid attention to in the use of mud pumps?

1. The installation location of the mud pump: The mud pump should be installed on a relatively stable ground and away from the bottom of the well to avoid problems such as mud backflow. <br/> 2. The safety valve of the mud pump: When the mud pump is working normally, it is necessary to keep the safety valve in normal operation to prevent damage to the mud pump or accidents caused by excessive pressure. <br/> 3. The inlet and outlet valves of the mud pump: During the operation of the mud pump, it is necessary to ensure the normal operation of the inlet and outlet valves, so as to adjust the mud flow and ensure that the mud delivery meets the operating requirements. <br/> 4. Sealing ring of the mud pump: The sealing ring of the mud pump is one of the key components to ensure the normal operation of the mud pump. It must maintain good sealing performance, otherwise it will cause leakage of the mud pump and affect the normal drilling operation. <br/> 5. Cleaning of the mud pump: During the working process, the mud pump is often subject to problems such as mud precipitation and solidification, so it needs to be cleaned and maintained regularly to ensure the operating efficiency and stability of the mud pump.


What are the characteristics of centrifugal pumps?

Centrifugal pumps are characterized by high efficiency due to the ability of their rotating impellers to accelerate the fluid, converting fluid energy into pressure energy. Centrifugal pumps are more efficient than other types of pumps, so they are widely used in industrial production.